Checking the engine oil level
Engine oil is used for lubricating, cooling, and operating various hydraulic components in the engine. Engine oil consumption whilst driving is normal, and it is necessary to check and refill the engine oil regularly. Also, check and refill the oil level within the recommended maintenance schedule to prevent deterioration of oil performance. Check the engine oil following the below procedure.
-
Be sure the vehicle is on level ground.
-
Start the engine and allow it to reach normal operating temperature.
-
Turn the engine off, remove the oil filler cap and pull the dipstick out. Wait for 15 minutes for the oil to return to the oil pan.
-
Wipe the dipstick clean and re-insert it fully.
-
Pull the dipstick out again and check the level. The level should be in the C range. If the level is in the D range, add enough engine oil to bring the level up the range.
Radiator hose
Be very careful not to touch the radiator hose when checking or adding the engine oil as it may be hot enough to burn you.
|
Range |
Required action according to the respective engine oil level |
|---|---|
|
A |
Contact an authorised Kia dealer/service partner. |
|
B |
Do not refill oil. |
|
C |
You may add oil as long as the oil level does not go above C-range. |
|
D |
You must add oil and make sure that the oil level is in the C-range. |
When you wipe the oil level gauge, you should wipe it with a clean cloth. When mixed with debris, it can cause engine damage.
Use only the specified engine oil. (Refer to More Details.)
-
Do not spill engine oil when adding or changing engine oil. Wipe off spilled oil immediately.
-
The engine oil consumption may increase whilst you break in a new vehicle and it will be stabilized after driving 6,000 km (4,000 miles).
-
The engine oil consumption can be affected by driving habits, climate conditions, traffic conditions, oil quality, etc. Therefore, it is recommended that you inspect the engine oil level regularly and refill it if necessary.