Operating turn signals and lane change signals
The ENGINE START/STOP button must be on for the turn signals to function.
-
Move the lever up or down (A).
The green arrow indicators on the instrument panel indicate which turn signal is operating.
They will self-cancel after a turn is completed. If the indicator continues to flash after a turn, manually return the lever to the OFF position.
-
Move the turn signal lever slightly and hold it in position (B).
The lever will return to the OFF position when released.
To turn on the turn signals:
To signal a lane change:
If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.
One-touch lane change function
To activate a one-touch lane change function, move the turn signal lever slightly and then release it. The lane change signals will blink 3, 5 or 7 times.
You can activate or deactivate the One Touch Turn Signal function or choose the number of blinking (3, 5, or 7) by selecting "User Settings →Lights → One Touch Turn signal".
If an indicator flash is abnormally quick or slow, a bulb may be burned out or have a poor electrical connection in the circuit.