1. Press and hold the Driving Assist button on the steering wheel, at the desired speed. The Speed Limit indicator will Illuminate on the cluster.

2. Push the + switch up or - switch down, and release it at the desired speed.

   
   

   Push the + switch up or - switch down and hold it. The speed will increase or decrease to the nearest multiple of ten (multiple of five in mph) at first, and then increase or decrease by 10 km/h (5 mph).

3. The set speed limit will be displayed on the cluster. If you would like to drive over the preset speed limit, depress the accelerator pedal beyond the pressure point to activate the kickdown function.

   The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

   

NOTICE

When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will maintain within the speed limit.

Press the switch to temporarily pause the set speed limit. The set speed limit will turn off but the Speed Limit indicator will stay on.

To resume Manual Speed Limit Assist after the function was paused, operate the +, - or switch.

If you push the + switch up or – switch down, set speed will be set to the current speed on the cluster. If you press the switch, set speed will resume to the preset speed.

Press the Driving Assist button to turn Manual Speed Limit Assist off. The Speed Limit indicator will go off. Always press the Driving Assist button to turn Manual Speed Limit Assist off when not in use.

WARNING

Take the following precautions when using Manual Speed Limit Assist:

• Always set the vehicle speed to the speed limit in your country.

• Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Speed Limit indicator is off.

• Manual Speed Limit Assist does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. Pay attention to the road conditions at all times.

Warning methods

You can adjust the Warning methods with ENGINE START/STOP button in the ON position.

• Warning volume: Select 'User settings → Driver assistance → Warning volume' on the instrument cluster or 'Settings → Vehicle → Driver assistance → Warning methods' on the infotainment system.

• Driving safety priority: Select 'Settings → Vehicle →Driver assistance → Warning methods → Driving Safety Priority' on the infotainment system. For safe driving, the audio volume will temporarily decrease to warn the driver with the audible warning.

NOTICE

• Ensure that Warning methods you have set may apply to the Warning volume of other Driver assistance systems.

• Warning methods will maintain its last setting even if the vehicle is restarted.

• The setting menu may not be available for your vehicle depending on the vehicle features and specifications.