Windscreen defrosting and defogging
When the windscreen is covered with frost or moisture, the front view is blurred, you should remove the frost and moisture.
Windshield heating
Do not use the 
or 
position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and
the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the
mode selection to the 
position and fan speed control to the lower speed.
-
For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed.
-
If warm air to the floor is desired whilst defrosting or defogging, set the mode to the floor-defrost position.
-
Before driving, clear all snow and ice from the windshield, rear window, outside rearview mirrors, and all side windows.
-
Clear all snow and ice from the bonnet and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windshield.