After driving approximately 7~10 km (4~6 miles, or approximately 10 minutes), stop the vehicle in a safe, level place.
Connect the filling hose directly to the tire valve.
Connect the power outlet connector.
Adjust the tire inflation pressure to the specified value.
- Turn the compressor on to increase the inflation pressure. Turn the compressor off briefly to check the current inflation pressure.
- Turn the compressor valve to reduce the inflation pressure.

WARNING

Do not let the compressor run for more than 10 minutes, otherwise the device will overheat and may be damaged.
The tire inflation pressure must be inflated to the proper pressure (Refer to More Details). If it is not, do not continue driving. Call for road side service or towing.

CAUTION

If the inflation pressure is not maintained, drive the vehicle a second time, refer to More Details. Then repeat steps 1 to 4.
Use of the TMK may be ineffectual for tire damage larger than approximately 4 mm (0.16 inches).
We recommend that you contact a professional workshop if the tire cannot be made roadworthy with the Tire Mobility Kit.

NOTICE

When reinstalling the repaired or replaced tire and wheel on the vehicle, tighten the wheel lug nut to 11~13 kgf·m (79~94 lbf·ft).