Intelligent front-lighting system (IFS) (if equipped)
Intelligent Front-Lighting System secures a clear view for the driver with the high beam on while driving at night.
System setting
A: Lights
-
Intelligent front-lighting
-
Faster Than 60 km/h
-
Faster Than 40 km/h
-
Faster Than 20 km/h
-
Off
With the vehicle in the ON position, select Settings → Vehicle → Lights → Intelligent front-lighting in the Settings menu to turn on Intelligent Front-Lighting System and deselect to turn off the system.
For your safety, change the Settings after parking the vehicle at a safe location.
System operation
Display and control
Intelligent Front- Lighting System will operate by following the procedure below.
-
Place the headlamp switch in the AUTO position and push the head lamp lever toward the instrument cluster. The Intelligent Front-Lighting System () indicator will illuminate on the cluster and the system will be enabled.
-
When the system is enabled, the Intelligent Front-Lighting System will operate according to the set speed in the infotainment system. The initial system is set to work when vehicle speed is above 40 km/h (25 mph).
-
The high beam LED partially turns off if an oncoming vehicle or a vehicle ahead is detected by the front view camera.
-
If Intelligent Front-Lighting System detects an oncoming vehicle or a vehicle ahead while driving at high speed (approximately above 100 km/h (60 mph), the driver's side headlamp will turn off and only the passenger's side headlamp will be controlled by the system.
System malfunction and limitations
System malfunction
A: Check Intelligent Front-Lighting System (IFS)
When Intelligent Front-Lighting System is not working properly, the warning message will come on for a few second on the cluster. After the message disappears, the warning lights AFS will illuminate. We recommend that you have your vehicle inspected by an authorized Kia dealer/service partner.
A: Intelligent Front-Lighting System (IFS) disabled. Camera obscured
When the front view camera is covered with dirt, snow, or debris, Intelligent Front-Lighting System may temporarily not work properly. If this occurs, a warning message will appear on the cluster.
The system will operate normally when such dirt, snow or debris is removed.
Intelligent Front-Lighting System may not properly operate in an area (e.g. open terrain) where any objects or vehicles are not detected after turning on the vehicle.
Also, even though a warning message does not appear on the cluster, the system may not properly operate.
Limitations of the system
Intelligent Front-Lighting System may not work properly in the following situations.
-
Light from a vehicle is not detected because of lamp damage, or because it is hidden from sight, etc.
-
Headlamp of a vehicle is covered with dust, snow or water.
-
There is a lamp that has a similar shape as a vehicle's lamp.
-
A vehicle's headlamps are off but the fog lamps are on and etc.
-
Headlamps have been damaged or not repaired properly.
-
Headlamps are not aimed properly.
-
Driving on a narrow curved road, rough road, uphill or downhill.
-
Vehicle in front is partially visible on a crossroad or curved road.
-
There is a traffic light, reflecting sign, flashing sign or mirror ahead.
-
There is a temporary reflector or flash ahead (construction area).
-
The road conditions are bad such as being wet, iced or covered with snow.
-
A vehicle suddenly appears from a curve.
-
The vehicle is tilted from a flat tire or is being towed.
-
There are many street lights or the ambient light is bright.
-
Light from a vehicle is not detected because of exhaust fume, smoke, fog, snow, etc.
-
The front windshield is covered with foreign substance.