Smart Cruise Control operation
Operating conditions
Smart Cruise Control will operate when the following conditions are satisfied.
Basic function
-
The gear is in D (Drive)
-
The driver's door is closed
-
EPB (Electronic Parking Brake) is not applied
-
Your vehicle speed is within the operating speed range
-
When there is no vehicle in front: 10~180 km/h (5~110 mph)
-
when there is a vehicle in front: 0~180 km/h (0~110 mph)
-
-
ESC (Electronic Stability Control) or ABS is on
-
ESC (Electronic Stability Control) or ABS is not controlling the vehicle
-
Forward Collision-Avoidance Assist brake control is not operating
-
Remote Smart Parking Assist brake control is not operating (if equipped)
-
The vehicle is not in a power down status (Power down indicator light is not illuminated)
When stopped behind another vehicle, the driver can turn on Smart Cruise Control while the brake pedal is depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will operate when the turn signal indicator is turned on to the left (left-hand drive) or turned on to the right (right-hand drive) while Smart Cruise Control is operating, and the following conditions are satisfied:
-
Your vehicle speed is above 60 km/h (40 mph)
-
The hazard warning flasher is off
-
A vehicle is detected in front of your vehicle
-
Deceleration is not needed to maintain distance with the vehicle in front
-
When the turn signal indicator is turned on to the left (left-hand drive) or turned on to the right (right-hand drive) while there is a vehicle ahead, the vehicle may accelerate temporarily. Pay attention to the road conditions at all times.
-
Regardless of your country's driving direction, Overtaking Acceleration Assist will operate when the conditions are satisfied. When using the function in countries with different driving direction, always check the road conditions at all times.