Operation

1. OFF (O)

2. AUTO

   • The headlamps and tailamps will turn ON or OFF automatically depending on the external ambient light level.

3. Position & Taillamp ()

4. Low beam ()

NOTICE

The vehicle must be in the ON position to turn on the headlights.

CAUTION

• Never place anything over the sensor located on the instrument cluster as this will ensure better auto-light system control.

• Don't clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.

• If your vehicle has window tint or other types of metallic coating on the front windshield, the Auto light system may not work properly.

Operation

• Move the lever up or down (A).

NOTICE

If an indicator flash is abnormally quick or slow, a bulb may be burned out or have a poor electrical connection in the circuit.

Operation

• Move the turn signal lever up or down (B).

• Release the lever.

NOTICE

• You can activate or deactivate the One Touch Turn Signal function or choose the number of blinking (3, 5, or 7) by selecting Settings → Vehicle → Lights → One-touch turn indicator.

• If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.

Operation

• Turn the fog light switch (1) to the dedicated position.

• Rear: ()

Operating condition(s)

• The headlamps are turned ON.

CAUTION

When in operation, the fog lights consume large amounts of vehicle electrical power. Only use the fog lights when visibility is poor.

Operation

• Push the lever to use high beam.

• Pull the lever towards you to flash the headlights ().

WARNING

Do not use high beam when there are other vehicles. Using high beam could obstruct the other driver's vision.