LCD display modes
Mode |
|||||
---|---|---|---|---|---|
Driving Assist |
Trip Computer |
Turn By Turn (TBT)* |
Information |
Master Warning |
|
Up/Down |
Forward Collision-Avoidance Assist Lane Keeping Assist Blind-Spot Collision-Avoidance Assist Smart Cruise Control Lane Following Assist Highway Driving Assist |
Drive Information |
Route Guidance |
TPMS |
The Master Warning mode displays warning messages related to the vehicle when one or more systems is not operating normally. |
Driver Attention Warning |
After Recharging |
Destination Info |
|||
Intelligent Speed Limit Assist |
Accumulated Info |
||||
Energy Flow (4WD) |
Electric energy economy
-
Average electric energy economy
-
Instant electric energy economy
Driving assist mode
This mode displays the state of:
-
Forward Collision-Avoidance Assist
Lane Keeping Assist
Blind-Spot Collision-Avoidance Assist
Smart Cruise Control
Lane Following Assist
Highway Driving Assist
-
Driver Attention Warning
-
Intelligent Speed Limit Assist
Trip computer mode
* You may change through items in the following order.
Drive Info
A: Drive Info
-
Accumulated trip distance
-
Average energy consumption
-
Total driving time
The driver's door is opened after turning off the vehicle or the vehicle is turned on after 3 minutes have passed, the Drive Info screen will reset.
After recharging
A: After recharging
-
Accumulated trip distance
-
Average energy consumption
-
Total driving time
The information after recharging.
To manually reset the information, press and hold the OK button when viewing the After recharging.
Accumulated Info
A: Accumulated Info
-
Accumulated trip distance
-
Average energy consumption
-
Total driving time
The information is accumulated starting from the last reset.
To manually reset the information, press and hold the OK button when viewing the Accumulated Info.
-
The vehicle must be driven for a minimum of 300 meters (0.19 miles) since the last cycle before the accumulated driving information is recalculated.
-
The average electric energy economy is not displayed for more accurate calculation if the vehicle does not drive more than 10 seconds or 50 meters (0.03 miles) since the EV button is turned to ON.
Energy flow (4WD) (if equipped)
-
The electric vehicle system informs the drivers its energy flow in various operating modes.
-
The distribution status of the driving power of the front and rear wheels are displayed when Auto 4WD mode is activated. For more details, refer to More Details.
Turn By Turn (TBT) mode
This mode displays the Navigation status.
Information mode
Master warning mode
This mode informs you of the following situations:
-
Driver assistance system malfunction, limitation or radar/camera blockage
-
LED headlamp malfunction
-
Lamp malfunction
-
TPMS failure, low tire pressure, etc.
At this time, a Master Warning icon () will appear in the lower right corner on the LCD display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.
Service Interval
A: Service Interval
-
Service interval schedule
To reset the service interval, select Settings → Vehicle → Cluster → Service Interval → Reset.
Calculates and displays when you need a scheduled maintenance service (mileage or days). If the remaining mileage or time reaches 1,500 km (900 miles) or 30 days, the message Service in is displayed for several seconds each time you set the vehicle to the ON position.
Driver assistance settings (infotainment system)
select Settings → Vehicle → Driver assistance on the infotainment system screen to set the Driver Assistance function.
-
Driver assistance
-
SCC (Smart Cruise Control)
-
Driving Convenience
-
Speed limit
-
Warning timing
-
Warning volume
-
Haptic warning
-
DAW (Driver Attention Warning)
-
Forward safety
-
Lane safety
-
Blind-spot safety
-
Parking safety
-