EV6 Manual
Search by Title only
Home > Driving your vehicle > Smart regeneration system > Operating smart regeneration system

Operating smart regeneration system

Operation

  1. Select SettingsECO VehicleSmart RecuperationFaster deceleration/Normal deceleration/Slow deceleration on the infotainment system.

  2. Pull and hold the right side () of the paddle shifter for more than approximately 1 second.

    • AUTO symbol will be displayed on the cluster.

    • The regenerative braking level can be adjusted based on the driver's deceleration style.

Operating condition(s)

  • When the vehicle speed is above approximately 10 km/h (6 mph)

  • The road gradient changes

  • Distance from the vehicle ahead reduces or increases

  • Speed of the vehicle ahead reduces or increases

Detecting sensor

Front radar

Always make sure the radar sensor cover is clean and free of dirt, snow, and debris.

Dirt, snow, or foreign substances on the lens may adversely affect the sensing performance of the sensor. In this case, the system operation may stop temporarily and not operate normally.

Temporarily canceling smart regeneration system

Operating condition(s)

  • The vehicle is shifted to N (Neutral), R (Reverse) or P (Park).

  • Cruise Control or Smart Cruise Control is operating.

  • ESC (Electronic Stability Control) or ABS is operating.

Setting default smart regeneration system level

Operation

  • Pull the paddle shifter when the smart regeneration system is ON. The level adjustment by smart regeneration system will operate above set level.

Resuming smart regeneration system

Operation

  • Pull and hold the right side of the paddle shifter for more than approximately 1 second again.

Turning smart regeneration system off

Operation

  • Pull and hold the right side of the paddle shifter for more than approximately 1 second.