Carens Manual
Search by Title only
Home > Maintenance > Brake/clutch fluid > Checking brake/clutch fluid level

Checking brake/clutch fluid level

Operation

  1. Clean the area around the reservoir cap.

  2. Periodically check that the fluid level in the brake fluid reservoir is between MIN and MAX. The level will fall with accumulated mileage. This is a normal condition associated with the wear of the brake linings.

Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Never mix different types of fluid.

Use only the specified brake fluid. (Refer to More Details.)

NOTICE

If the fluid level is excessively low, have the system checked by a professional workshop. Kia recommends that you visit an authorised Kia dealer/service partner.

WARNING
  • In the event the brake system requires frequent additions of fluid, have the system inspected by a professional workshop. Kia recommends that you visit an authorised Kia dealer/service partner.

  • When changing and adding brake fluid, handle it carefully. Do not let it come in contact with your eyes. If brake fluid should come in contact with your eyes, immediately flush them with a large quantity of fresh tap water. Have your eyes examined by a doctor as soon as possible.

CAUTION
  • Do not allow brake/clutch fluid to contact the vehicle's body paint, as paint damage will result.

  • Brake/clutch fluid, which has been exposed to open air for an extended time should never be used as its quality cannot be guaranteed. It should be properly disposed.

  • Don't put in the wrong kind of fluid. A few drops of mineral-based oil, such as engine oil, in your brake system can damage brake system parts.

  • The brake/clutch fluid constantly absorbs moisture from the air. This lowers the boiling point of the brake/clutch fluid. If the boiling point is too low, vapour pockets may form in the brake system when the brakes are applied hard.