Replacing headlamp (low/high)/turn signal lamp/position lamp bulb (bulb type) (headlamp type A)
-
Headlamp (low and high)
-
Position lamp
-
Turn signal lamp
To prepare replacing the lamp bulb:
1
Open the bonnet.
To replace the headlamp (low/high) bulb:
1
Remove the front bumper.
2
Remove the headlight from vehicle by unscrewing the 2 bolts on top of the headlight.
3
Remove the headlight bulb cover by turning it counterclockwise.
4
Disconnect the headlight bulb socket-connector.
5
Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward.
6
Remove the bulb from the headlight assembly.
7
Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove
on the bulb.
8
Connect the headlight bulb socket connector.
9
Install the headlight bulb cover by turning it clockwise.
To replace the turn signal lamp, position bulb:
1
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
2
Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
3
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly.
4
Push the socket into the assembly and turn the socket clockwise.