Sonet Manual
Search by Title only
Home > Features of your vehicle > Lighting > High Beam Assist (HBA)

High Beam Assist (HBA) (if equipped)

High Beam Assist is a function that automatically adjusts the headlamp range (switches between high beam and low beam) depending on the brightness of detected vehicles and certain road conditions.

Detecting sensor

Front view camera

The front view camera is used as a detecting sensor to detect ambient light and brightness whilst driving.

Refer to the picture above for the detailed location of the detecting sensor.

NOTICE
  • Always keep the front view camera in good condition to maintain optimal performance of High Beam Assist.

  • For more details on the precautions of the front view camera, refer to More Details.

High Beam Assist Setting

A: Vehicle Settings

  1. Lights

  2. High Beam Assist

With the vehicle in the ON position, select User SettingsLightsHigh Beam Assist in the instrument cluster, or select SettingsVehicleLightsHigh Beam Assist in the Infotainment system to turn on High Beam Assist function.

WARNING

For your safety, change the Settings after parking the vehicle at a safe location.

High Beam Assist operation

Display and control

  • After selecting HBA (High Beam Assist) in the Settings menu, High Beam Assist will operate by following the procedure below.

    • Place the headlamp switch in the AUTO position and push the headlamp lever towards the instrument cluster. The High Beam Assist indicator light () will appear on the cluster and the function will be enabled.

    • When the function is enabled, high beam may turn on when vehicle speed is above 30 km/h (20 mph). When vehicle speed is below 20 km/h (12 mph), high beam will not turn on.

    • The High Beam indicator light () will appear on the cluster when high beam is on.

  • When High Beam Assist is operating, if the headlamp lever or switch is used, the function operates as follows:

    • If the headlamp lever is pulled towards you when the high beam is off, the high beam will turn on without High Beam Assist cancelled. When you let go of the headlamp lever, High Beam Assist will turn on again.

    • If you push the light switch towards the instrument cluster, high beam is turned on and High Beam Assist is turned off.

    • If the headlamp lever is pulled towards you when the high beam is on by High Beam Assist, low beam will be on and the function will turn off.

    • If the headlamp switch is placed from AUTO to another position (headlamp/position/off), High Beam Assist will turn off and the corresponding lamp will turn on.

  • When High Beam Assist is operating, high beam switches to low beam if any of the following conditions occur:

    • When the headlamp of an oncoming vehicle is detected.

    • When the taillamp of a vehicle in front is detected.

    • When the headlamp or taillamp of a motorcycle or a bicycle is detected.

    • When the surrounding ambient light is bright enough that high beams are not required.

    • When streetlights or other lights are detected.

High Beam Assist malfunction and limitations

High Beam Assist malfunction

A: Check High Beam Assist (HBA) system

When High Beam Assist is not working properly, the warning message will appear and Master warning light () will appear on the cluster. Have the function inspected by an authorised Kia dealer.

Limitations of High Beam Assist

High Beam Assist may not work properly in the following situations:

  • Light from a vehicle is not detected because of lamp damage, or because it is hidden from sight, etc.

  • Headlamp of a vehicle is covered with dust, snow or water.

  • A vehicle's headlamps are off but the fog lamps are on and etc.

  • There is a lamp that has a similar shape as a vehicle's lamp.

  • Headlamps have been damaged or not repaired properly.

  • Headlamps are not aimed properly.

  • Driving on a narrow curved road, rough road, uphill or downhill.

  • Vehicle in front is partially visible on a crossroad or curved road.

  • There is a traffic light, reflecting sign, flashing sign or mirror ahead.

  • There is a temporary reflector or flash ahead (construction area).

  • The road conditions are bad such as being wet, iced or covered with snow.

  • A vehicle suddenly appears from a curve.

  • The vehicle is tilted from a flat tyre or is being towed.

  • Light from a vehicle is not detected because of smoke, fog, snow, etc.

NOTICE
  • Depending on the instrument cluster specification or theme, images or colours may be displayed differently.

  • For more details on the limitations of the front view camera, refer to More Details.

NOTICE
  • At times, High Beam Assist may not work properly. The function is for your convenience only. It is the responsibility of the driver for safe driving practices and always check the road conditions for your safety.

  • When High Beam Assist does not operate normally, change the headlamp position manually between high beam and low beam.