You can listen to music stored in the connected Bluetooth audio device via your vehicle's speakers.

1. On the control panel, press the [AUDIO] button.

2. When the mode selection window displays, turn the [TUNE] knob to select Bluetooth audio and then press the knob.

1. Information about the song currently playing

1. Press the [MENU/CLOCK] button on the control panel to access the following a menu option.

2. Turn the [TUNE] knob to select option and then press the knob.

• Sound settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

  • Position: Select a location where sound will be concentrated in the vehicle. Select Fader or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehicle, select Centre.

  • Equaliser: Adjust the output level for each sound tone mode.

  • Sound experience: Select the location where sound is focused in the vehicle between the driver's seat and all other seats.

  • Speed dependent vol.: Set the volume to be adjusted automatically according to your driving speed.

    

    Notice

    • Depending on vehicle models or specifications, available options may vary.

    • Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

• Mode popup: Set to display mode selection window when the [AUDIO] button is pressed on the control panel.

• Bluetooth remote lock: Even if Bluetooth remote control application is connected, if Set Lock remote controls is enabled. System cannot be operated via smart phone application.

• Date/Time: You can change the date and time that are shown on the system display.

  • Set date: Set date to display on the system display.

  • Set time: Set time to display on the system display.

  • Time format: Select to display time in the 12 hour format or the 24 hour format.

  • Display (Power Off): Set to display the clock when the system power is off.

• Language: You can change the display language.

To pause playback, press the [TUNE] knob on the control panel. To resume playback, press the [TUNE] knob again.

• You can also press the Mute button on the steering wheel remote control.

On the control panel, press the [1 RPT] button. The corresponding mode icon will be displayed on the screen and the playing song will be repeated.

On the control panel, press the [2 SHFL] button. The shuffle mode is activated or deactivated each time you press it. When you activate the shuffle mode, the corresponding mode icon will be displayed on the screen. When shuffle is active, the available songs will be played randomly.