Sonet Manual
Search by Title only
Home > Safety features of your vehicle > Seat > Front seat adjustment for power seat

Front seat adjustment for power seat (if equipped)

The driver's seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, pedals and switches on the instrument panel.
WARNING

The power seat is operable with the ignition OFF.

Therefore, children should never be left unattended in the car.

NOTICE
  • The power seat is driven by an electric motor. Stop operating once the adjustment is completed. Excessive operation may damage the electrical equipment.

  • When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary charging system drain, don't adjust the power seat longer than necessary whilst the engine is not running.

  • Do not operate two or more power seat control switches at the same time. Doing so may result in power seat motor or electrical component malfunction.

Moving forward and backward

To move the seat forward or backward:

  1. Press the front portion of the switch to move the seat forward, or the rear portion of the switch to rearward it.

  2. Release the switch once the seat reaches the desired position.

Reclining seatback

To recline the seatback:

  1. Press the front portion of the switch to recline the seat forward, or the rear portion of the switch to rearward it.

  2. Release the switch once the seat reaches the desired position.

Changing seat cushion height (driver's side)

To change the height of the seat cushion, push the lever upwards or downwards.

  • To lower the seat cushion, push down the lever several times.

  • To raise the seat cushion, pull up the lever several times.