Heating and air conditioning manually

-
Start the engine.
-
Set the mode to the desired position.
For improving the effectiveness of heating and cooling;
-
Heating:
-
Cooling:
-
-
Set the temperature control to the desired position.
-
Set the air intake control to the outside (fresh) air position.
-
Set the fan speed control to the desired speed.
If air conditioning is desired, turn the air conditioning system on.
Mode selection

Air can be directed to the floor, dashboard outlets, or windscreen. Five symbols are used to represent Face, Bi-Level, Floor, Floor-Defrost and Defrost air position.
Face-Level (B, D, F)
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Bi-Level (B, C, D, F)
Air flow is directed towards the face and the floor.
Floor-Level (C, D)
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windscreen, side window defrosters and side air vents.
Floor/Defrost-Level (A, C, D)
Most of the air flow is directed to the floor and the windscreen with a small amount directed to the side window defrosters and side air vents.
Defrost-Level (A, D)
Most of the air flow is directed to the windscreen with a small amount of air directed to the side window defrosters and side air vents.
Instrument panel vents

You can adjust the direction of air delivered from these vents using the vent control lever as shown.
Temperature control

To change the air temperature in the passenger compartment, turn the knob to the right for warm and hot air or to the left for cooler air.
Controlling air intake

To change the air intake control position.
-
Push the desired control button
Recirculated air position

Outside (fresh) air position


Prolonged operation of the heater in the recirculated air position (without air conditioning selected) may cause fogging of the windscreen and side windows and make the air in the passenger compartment stale.
In addition, prolonged use of the air conditioning with the recirculated air position selected will result in excessively dry air in the passenger compartment.

-
Continue using the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.
-
Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature.
-
Continue using the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible whilst driving.
Controlling fan speed
The ENGINE START/STOP button must be in the ON position for fan operation.
To change the fan speed:
-
Press the right button for higher speed or press the left button for lower speed.
Turning off the blowers
To turn off the blowers:
-
Press the left fan speed control button to the off position.
Air conditioning (A/C)

-
Press the A/C button to turn the air conditioning system on (indicator light will appear).
-
Press the button again to turn the air conditioning system off.