1. On the control panel, press the [AUDIO] button.

2. When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob.

1. Current radio mode

2. Radio station information

3. Preset list

Press the [MENU/CLOCK] button on the control panel to access the following menu options:

• Autostore: Save radio stations to the preset list.

• Scan: The system searches for radio stations with strong radio signals and plays each radio station for about five seconds.

• Sound settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

  • Position: Select a location where sound will be concentrated in the vehicle. Select Fader or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehicle, select Centre.

  • Equaliser: Adjust the output level for each sound tone mode.

  • Sound experience: Select the location where sound is focused in the vehicle between the driver's seat and all other seats.

  • Speed dependent vol.: Set the volume to be adjusted automatically according to your driving speed.

    

    Notice

    • Depending on vehicle models or specifications, available options may vary.

    • Depending on the system or amplifier specifications applied to your vehicle, available options may vary.

• Mode popup: Set to display mode selection window when the [AUDIO] button is pressed on the control panel.

• Bluetooth remote lock: Even if Bluetooth remote control application is connected, if Set Lock remote controls is enabled. System cannot be operated via smart phone application.

• Date/Time: You can change the date and time that are shown on the system display.

  • Set date: Set date to display on the system display.

  • Set time: Set time to display on the system display.

  • Time format: Select to display time in the 12 hour format or the 24 hour format.

  • Display (Power Off): Set to display the clock when the system power is off.

• Language: You can change the display language.