Indicator lights
Electronic stability control (ESC) indicator light
(if equipped)
-
Once you set the ignition switch or ENGINE START/STOP button to the ON position.
-
It appears for approximately 3 seconds and then goes off.
-
-
When there is a malfunction with the ESC system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Whilst the ESC is operating.
* For more details, refer to More Details.
Auto Stop indicator
(if equipped)
This indicator will appear when the engine enters the Idle Stop mode of ISG (Idle Stop and Go) system.
When the automatic starting occurs, the auto stop indicator on the cluster will blink for 5 seconds.
* For more details, refer to More Details.

When the engine automatically starts by ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds. This happens because of the low battery voltage. It does not mean the system is malfunctioning.
Electronic stability control (ESC) OFF indicator light
(if equipped)
-
Once you set the ignition switch or ENGINE START/STOP button to the ON position.
-
It appears for approximately 3 seconds and then goes off.
-
-
When you deactivate the ESC system by pressing the ESC OFF button.
* For more details, refer to More Details.
Immobiliser indicator light (without smart key)
(if equipped)
-
When the vehicle detects the immobiliser in your key properly whilst the ignition switch is ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When there is a malfunction with the immobiliser system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Immobiliser indicator light (with smart key)
(if equipped)
-
When the vehicle detects the smart key in the vehicle properly whilst the ENGINE START/STOP button is ACC or ON.
-
At this time, you can start the engine.
-
The indicator light goes off after starting the engine.
-
-
When the smart key is not in the vehicle.
-
At this time, you can not start the engine.
-
-
When the vehicle can not detect the smart key which is in the vehicle whilst the ENGINE START/STOP button is ON.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
-
When the battery of the smart key is weak.
-
At this time, you can not start the engine. However, you can start the engine if you press the ENGINE START/STOP button with the smart key. (For more details, refer to More Details).
-
-
When there is a malfunction with the immobiliser system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
Turn signal indicator light 
-
When you turn the turn signal light on.
If any of the following occurs, there may a malfunction with the turn signal system. In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.
-
The indicator light does not blink but appears.
-
The indicator light blinks more rapidly.
-
The indicator light does not appear at all.
Low beam indicator light 
-
When the headlights are on.
High beam indicator light 
-
When the headlights are on and in the high beam position.
-
When the turn signal lever is pulled into the Flash-to-Pass position.
Light ON indicator light 
-
When the tail lights or headlights are on.
Front fog indicator light
(if equipped)
-
When the front fog lights are on.
Glow indicator light (Diesel Engine) 
-
When the engine is being preheated with the ignition switch or ENGINE START/STOP button in the ON position.
-
The engine can be started after the glow indicator light goes off.
-
The illumination time varies with the engine coolant temperature, air temperature, and battery condition.
-
If the indicator light remains on or blinks after the engine has warmed up or whilst driving, there may a malfunction with the engine preheating system.
In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

Engine preheating
If the engine does not start within 10 seconds after the preheating is completed, set the ignition switch or ENGINE START/STOP button to the LOCK or OFF position for 10 seconds and then to the ON position in order to preheat the engine again.
Cruise indicator light
(if equipped)
-
When Cruise Control is enabled.
* For more details, refer to More Details.
Cruise SET Indicator Light
(if equipped)
-
When Cruise Control speed is set.
* For more details, refer to More Details.
Door Ajar Warning Light
(if equipped)
When a door is not closed securely.
Tailgate Open Warning Light
(if equipped)
When the tailgate is not closed securely.