Front wiper blade replacement

N_SP3i26_B12_052_1_IR

To replace the wiper blade, lift the arm first and replace the windscreen wiper blades as per procedure.

NOTE

Wiper arms

Do not allow the wiper arm to fall against the windscreen, as it may crack or chip the glass.

  1. Raise the wiper arm.
  2. For Type A, lift up the wiper blade clip. Then pull down the blade assembly and remove it.
    Figure 1. Type A
    N_SP3i26_B12_053_1_IR
  3. For Type B, rotate the wiper blade in the direction of the arrow.
    Figure 2. Type B
    N_SP3i26_B12_093_IR
  4. For Type A, install the new blade assembly.
    Figure 3. Type A
    N_SP3i26_B12_054_1_IR
  5. For Type B, remove the front wiper blade by pressing the locking pin in the direction of the arrow.
    Figure 4. Type B
    N_SP3i26_B12_094_IR
    Figure 5. Type B
    N_SP3i26_B12_095_IR
  6. Make sure that both blade assemblies are installed firmly by trying to pull them slightly.
  7. Return the wiper arms to the windshield.
  8. Start the vehicle to the ON position to return the wiper arms to their normal operating position.