1. Getting ready to remotely move forward and backward

There are two ways to operate Remote Operation function.

Method (1): Using the function with vehicle off

OSV054181_2

  1. door lock () button

  2. Remote Start button ()

  1. Within a certain range from the vehicle press the door lock () button on the smart key and lock all doors.

  2. Press and hold the Remote Start button () within 4 seconds until the vehicle starts.

For more details on remotely starting the vehicle, refer to Smart key .

Method (2): Using the function with vehicle on

OMV054349_2

  1. P (Park)

  2. Parking/View button

  1. Park the vehicle in front of the space where you want to use Remote Operation function, and shift the gear to P (Park).

  2. Press and hold the Parking/View () button to turn on Smart Parking Assist. A message Under REMOTE control will appear on the infotainment system screen.

  3. Get out of the vehicle with the smart key and close all doors.

NOTE

  • Agree must be selected on the infotainment system screen and the infotainment system has to operate properly to use Remote Operation function.

  • Method (2) can be used after the vehicle has been driven above 5 km/h (3 mph).

  • If the function is turned on again after parallel parking is completed by Remote Smart Parking Assist, Remote Operation function can be used with Method (2).

  • Before initiating the Remote Operation function from outside the vehicle, make sure not to leave any smart keys inside the vehicle.

  • The Remote Operation function will not work if there is a spare smart key inside the vehicle.