Headlamp (High beam) bulb replacement (Headlamp Type A)
1
Open the bonnet.
2
Remove the headlamp bulb cover by turning it counterclockwise.
3
Disconnect the headlamp bulb socket-connector.
4
Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket
align with the slots on the headlamp assembly.
5
Install a new bulb-socket assembly in the headlamp assembly by aligning the tabs on the bulb-socket with the slots in the
headlamp assembly. Push the bulb-socket into the headlamp assembly and turn the bulb-socket clockwise.
6
Connect the headlamp bulb socket-connector.
7
Install the headlamp bulb cover by turning it clockwise.
Headlamp bulb
Warning
Halogen bulbs
-
Halogen bulbs contain pressurized gas that will produce flying pieces of glass if broken.
-
Always handle them carefully, and avoid scratches and abrasions. If the bulbs are lit, avoid contact with liquids.
-
Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit.
A bulb should be operated only when installed in a headlight.
-
If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it.
-
Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.