Auto Defogging System (ADS) (if equipped)
The auto defogging system operates when the AUTO mode is on.
If more moisture is in the vehicle, higher steps operate as follow.
Step 1: Operating the air conditioning
Step 2: Outside air position
Step 3: Blowing air flow toward the whilst
Step 4: Increasing air flow toward the whilst
If your vehicle is equipped with the auto defogging system, it is automatically activated when the conditions are met.
To cancel or reset the Auto Defogging System (ADS).
Press the front windscreen defroster button for 3 seconds when the ignition switch is in the ON position.
When the ADS system is cancelled, Indicator on the button will blink 3 times per 0.5 sec.
When the ADS system is reset, Indicator on the button will blink 6 times per 0.25sec.
If the battery has been disconnected or discharged, it resets to the auto defogging status.
If the A/C off is manually selected whilst the auto defogging system is on, the auto defogging indicator will blink 3 times to give notice that the A/C off can not be selected.
Do not remove the sensor cover located on the upper end of the passenger side windscreen glass. Damage to the system parts could occur and may not be covered by your vehicle warranty.